GVT / PGVT / SGVT Tiles
High-gloss glazed vitrified tiles with superior scratch resistance and minimal water absorption.
About GVT / PGVT / SGVT Tiles
High-gloss glazed vitrified tiles with superior scratch resistance and minimal water absorption.
Available Sizes: 60×60 cm, 60×120 cm, 80×80 cm
GVT, PGVT and SGVT: what the names mean
These are all vitrified tiles, which are fired until the body is dense and absorbs very little water. The letters describe how the surface is made and finished.
GVT: glazed vitrified tile
A printed design is applied to the surface and sealed under a glaze layer before firing. Because the pattern is printed, GVT tiles can imitate stone, wood or marble in a wide range of designs and finishes.
PGVT: polished glazed vitrified tile
A GVT that is polished after firing for a higher shine and a smoother, reflective surface. Polished tiles suit living rooms and showrooms where a glossy look is wanted, and they need regular wiping to keep the shine.
SGVT: soluble salt vitrified tile
Soluble salts are printed into the surface, then the tile is polished. The pattern is part of the surface rather than under a glaze, so it can give a rich, deep look with a clear shine.
Which should you choose?
For busy areas or places that may get wet, a matte or textured finish gives better grip. For a formal room with light foot traffic, a polished finish gives the most impact. Large sizes mean fewer joints, but need a flat floor and careful laying.
Why Choose Itone GVT / PGVT / SGVT Tiles?
Premium Finish
HD digital printing
Scratch Resistant
Low Water Absorption
Wide Range
Many sizes & finishes
Frequently Asked Questions
GVT (Glazed Vitrified Tile) has a matte-to-semi-gloss glazed finish suitable for general residential flooring. PGVT (Polished Glazed Vitrified Tile) goes through an additional polishing process for a higher-shine, premium finish.